DELL PERC H200 ACTIVITY CABLES MOD
DELL PERC H200 ACTIVITY CABLES PRO

Given the choice, take the H310 over the H200. Don't count on 12V fans to start at only 5V.ДЈ. $20 non-contact thermometers are not particularly useful to measure spot temperatures of shiny components.Дў. I was able to hold my finger on the heatsink without it being anything more than a little warm.ДЎ. Once running, the same disk speed test went to 33.0C. Or anything else, really.)ДЄdding 40mm, 12V, ball-bearing fan to H310 heatsink showed that the heatsink was one row of fins larger.

DELL PERC H200 ACTIVITY CABLES MOD

The application is a modified version commonly called Mod APK, dont worry because this version is.

DELL PERC H200 ACTIVITY CABLES PRO

(Donations of a Flir thermal imager cheerfully accepted. Alternatively you can download the Alight Motion Pro version. The highest temperature seen in a repeated test was 38.2C. Tilting the thermometer input one way gave 35.8. H310 after read-only speed test ( diskinfo -tv da0) on WD 750G drive (approximately 35 seconds): 31.8C Felt warmer, uncomfortably warm to a finger but not instantly too hot. Room temperature was about 23-24C.Д«oth tests with the heatsink alone, Gelid 'GC Extreme' heatsink compound, one drive connected, approximately thirty seconds after booting FreeBSD ( mfsBSD), no drive activity. Also, the heat sinks are silver and reflective, so it would not surprise me if actual temperatures were 50% higher or more. Some numbers measured with a digital non-contact thermometer that is probably not too trustworthy for absolute values. Pool: Mirror (12 x 4TB HGST Deskstar NAS HDN726040ALE614 and Ultrastar 7K4000 HUS72404ALE640) Network: SolarFlare SFN6122F 10GbE, 4 x Intel GbEД®SXi boot and datastores: 100GB Intel DC S3700 + 512GB Samsung 970 PRO M.2 NVMe SSD on Supermicro AOC-SLG3-2M2 Virtualized on VMware ESXi v6.7 with 4 vCPUs and 128GB RAMД«oard: Supermicro X9DRi-LN4F+ with dual Intel Xeon E5-2680 v2 256GB RAMД¬ase: Supermicro CSE-846BA-R920B 4U 24-bay with BPN-SAS-846A backplane Pool: Mirror (2 x 12TB HGST Ultrastar DC HC520 (0F30141)

Network: SolarFlare SFN6122F 10GbE, 2 x Intel GbE NICsД®SXi boot and datastores: 100GB Intel DC S3500 SSD + 512GB Samsung SM961 M.2 NVMe SSD Virtualized on VMware ESXi v6.7 with 2 vCPUs and 32GB RAMД«oard: Supermicro X11SSM-F with Intel Xeon E3-1280 v6 64GB RAMД¬ase: Supermicro 835TQ-R800B 3U 8-bay with CSE-SAS-833TQ backplane Pool 2: Stripe (2 x 14TB HGST/WDC Ultrastar DC HC530 WUH721414AL4204, alternating between fireproof safe and BACON) Pool 1: 2 x 5-disk RAIDZ2 vdevs using 4TB HGST UltraStar 7K6 SAS3 4kn drives On the board of the raid card to the pin connection says 'jsasact'. The cable only has two wires, one black and one red. Network: SolarFlare SFN6122F 10GbE, 2 x Intel GbE Anyways, the RAID card has 2 pins on it and there is a cable that that connects to a 4 pin connection on the riser. Board: Supermicro X10SRL-F with Intel Xeon E5-2667 v4 3.2GHz, 128GB RAMД¬ase: Supermicro SC826BE1C-R920LPB 3U 12-bay with BPN-SAS3-826EL1 backplane

Dell perc h200 activity cables